Browse by Department (no authority control)

Allen, Naomi (2008) MEMS sensors for wall shear stress and flow vector measurement. Doctoral thesis, Durham University.

Bagshaw, David Andrew (2009) Passage shaping in Axial Flow Turbines. Doctoral thesis, Durham University.

Blake, Simon (2008) An aeroacoustic study of industrial gas turbine intake and exhaust systems. Masters thesis, Durham University.

Cain, Martin (2007) Linear actuator for a submersible water pump for use in boreholes. Masters thesis, Durham University.

Cervera, Eva (2003) Evolutionary structural pptimisation based on boundary element representation of b-spline geometry. Doctoral thesis, Durham University.

Cheung, Wai Ming (2007) Distributed and collaborative product development and manufacturing knowledge management. Doctoral thesis, Durham University.

Dowding, Catherine E. (2008) The oxidative degradation of organic contaminants using a manganese oxide-containing mine waste. Doctoral thesis, Durham University.

Grocutt, Thomas Christopher (2005) Just-in-time Hardware generation for abstracted reconfigurable computing. Doctoral thesis, Durham University.

Hetherington, Ben (2006) Interference of supports used for ground vehicle wind tunnel testing. Doctoral thesis, Durham University.

Huang, Xiuquan (2006) Three-dimensional unsteady flow in the oscillating turbine blade row. Doctoral thesis, Durham University.

Jagger, Ian Michael (2006) Lightweight design of a suspension arm by friction stir welding. Masters thesis, Durham University.

Jaquin, Paul A. (2008) Analysis of historic rammed earth construction. Doctoral thesis, Durham University.

Kolb, Daniel (2008) Organic transistors based on pentacene and dibenzothiophene derivatives. Doctoral thesis, Durham University.

Koungelis, Dimosthenis (2007) Tools for numerical modelling of tunnelling interactions. Doctoral thesis, Durham University.

Legge, David Nathanial (2006) Application of ant based routing and intelligent control to telecommunications network management. Doctoral thesis, Durham University.

Lewenz, Roger (2005) Temporal variation in the radio environment. Doctoral thesis, Durham University.

Lomas, Christopher David William (2009) A design framework for agile virtual enterprise collaboration. Doctoral thesis, Durham University.

Maiden, Andrew (2005) Lithography in three dimensions using computer-generated holograms. Doctoral thesis, Durham University.

Martin, Richard (2007) Axial flux permanent magnet machines for direct drive applications. Doctoral thesis, Durham University.

Mathur, Nehika (2007) Implementation of design for environment principles in product development using a case study on the design of a passenger car door. Masters thesis, Durham University.

Muscroft, Robert J. M. (2006) Non-intrusive support of ground vehicle wind tunnel models through superconducting magnetic levitation. Doctoral thesis, Durham University.

O'Brien, Roger William (2007) Predicting weld distortion in the design of automotive components. Masters thesis, Durham University.

Owens, Gethin Lloyd (2007) Design of a reliability methodology: Modelling the influence of temperature on gate Oxide reliability. Doctoral thesis, Durham University.

Pugsley, William (2007) Analysis of design strategies for RF ESD problems in CMOS circuits. Doctoral thesis, Durham University.

Razavi-Ghods, Nima (2007) Characterisation of MIMO radio propagation channels. Doctoral thesis, Durham University.

Robinson, Craig (2004) Optimisation of Bluetooth wireless personal area networks. Doctoral thesis, Durham University.

Shatat, Mahmoud I. M. (2008) New and renewable energy and environmental engineering. Masters thesis, Durham University.

Solowski, Wojciech Tomasz (2008) Unsaturated soils: constitutive modelling and explicit stress integration. Doctoral thesis, Durham University.

Srinivasan, Lakshmi (2006) Measurement of stress in bolts using resonant ultrasound spectroscopy. Masters thesis, Durham University.

Turton, Andrew Charles (2006) Microfabricated liquid density sensors using polyimide-guided surface acoustic waves. Doctoral thesis, Durham University.

Wang, Dingxi (2008) Turbomachinery aerodynamic and aeromechanic design optimization using the adjoint method. Doctoral thesis, Durham University.

Wang, Zhelong (2004) Design study of an earthquake rescue robot. Doctoral thesis, Durham University.

Wen, Jie (2006) Determination of suitable values for parameters governing B-spline based evolutionary structural optimisation using the boundary element method. Masters thesis, Durham University.

Willoughby, Christopher (2008) Mass customisation procedures in engine assembly. Masters thesis, Durham University.

Yu, Liyi (2005) Simulation of radio networks. Masters thesis, Durham University.

Zhang, Lei (2006) Real-time digital signal processing system for normal probe diffraction technique. Masters thesis, Durham University.

Zheng, Yun (2004) Computational Aerodynamics on unstructed meshes. Doctoral thesis, Durham University.