Browse by Department (no authority control)

Doctoral

Beale, C. K. (1945) The pulsations and energy transfers in a double-orifice combustor. Doctoral thesis, Durham University.

Bedford, Stephen James (1986) Flexible magazine operation and cellular techniques in automation systems. Doctoral thesis, Durham University.

Birch, Alan Philip (1988) Adaptive load frequency control of electrical power systems. Doctoral thesis, Durham University.

Bousnane, Kafiha (1990) Real-time power system dynamic simulation. Doctoral thesis, Durham University.

Bromley, John (1989) The design and application of microprocessor based systems for clinical measurement of joint stiffness and grip strength. Doctoral thesis, Durham University.

Calliss, Frank William (1989) Inter-module code analysis techniques for software maintenance. Doctoral thesis, Durham University.

Chebbo, Ahmad Mustapha (1990) Security constrained reactive power dispatch in electrical power systems. Doctoral thesis, Durham University.

Cleak, James Gilbert Edwin (1989) Validation of viscous, three-dimensional flow calculations in an axial turbine cascade. Doctoral thesis, Durham University.

Craigen, J. G. (1975) Mathematical model of a pulsating combustor. Doctoral thesis, Durham University.

Davies, Peter Leslie (1987) Prolog and expert systems. Doctoral thesis, Durham University.

Eshragh, Nadereh (1989) Dynamic routing in circuit-switched non-hierarchical networks. Doctoral thesis, Durham University.

Flaxman, J. W. (1987) Multi-microprocessor power system simulation. Doctoral thesis, Durham University.

Giles, Paul A. (1990) Iterated function systems and shape representation. Doctoral thesis, Durham University.

Gunton, Martin Christopher (1981) Performance prediction for turbomachines. Doctoral thesis, Durham University.

Haws, Christine Margaret (1989) Selected physical properties of liquid grystallime polysiloxanes. Doctoral thesis, Durham University.

Hindle, Richard John (1989) Three-dimensional kinematics of the human back in the normal and pathologic spine. Doctoral thesis, Durham University.

Hirst, S. L. (1974) Heat transfer to a resonant pulsating air stream in a pipe. Doctoral thesis, Durham University.

Howarth, Vaughan Antony (1989) A study of langmuir-blodgett films of valinomycin. Doctoral thesis, Durham University.

Kalita, N. (1991) The pockels' effect in langmuir-blodgett films. Doctoral thesis, Durham University.

Lavelle, Stephen William (1989) Theoretical modelling of the m.i.s.s structure in one and two dimensions. Doctoral thesis, Durham University.

Leaver, Richard A. (1988) Stochastic arrays and learning networks. Doctoral thesis, Durham University.

Majlis, Burhanuddin bin Haji Yeop (1988) Electrical characteristics of SRO-miss devices and their applications. Doctoral thesis, Durham University.

Masding, Philip Wilson (1988) Some drive train control problems in hybrid i.c engine/battery electric vehicles. Doctoral thesis, Durham University.

Messaoudi, Mohammed (1994) Requirements elicitation through viewpoint control in a natural language environment. Doctoral thesis, Durham University.

Muhammad-Ahmad, Makki El-Tayyid (1987) Resonant cavity method for broadband dielectric measurements. Doctoral thesis, Durham University.

Nichols, S. J. (1990) Simulation and analysis of adaptive routing and flow control in wide area communication networks. Doctoral thesis, Durham University.

Nicholson, Peter Raynor (1987) Automation of garment assembly processes. Doctoral thesis, Durham University.

Pears, Nicholas Edwin (1989) The low-level guidance of an experimental autonomous vehicle. Doctoral thesis, Durham University.

Smith, Derek Beauman (1976) Condensate film flow on the surface of rotating cones. Doctoral thesis, Durham University.

Smith, Erling Aastrup (1975) A numerical comparison of commonly - used algorithms for structural optimisation. Doctoral thesis, Durham University.

Stokoe, Susan Marie (1990) A finger function simulator and surface replacement prosthesis for the metacarpophalangeal joint. Doctoral thesis, Durham University.

Tout, Nigel R (1989) Investigation of the processes required for the automation of stitchmarking in shoe manufacture. Doctoral thesis, Durham University.

Tuckey, Paul R. (1983) The aerodynamics and performance of a cross flow fan. Doctoral thesis, Durham University.

Ucmaklioglu, Mehmet (1978) Vibration of shells with application to hollow blading. Doctoral thesis, Durham University.

Walsh, Joseph Anthony (1987) Secondary flows and inlet skew in axial flow turbine cascades. Doctoral thesis, Durham University.

Wingate, Guy A.S. (1992) Software implemented fault tolerance for microprocessor controllers: fault tolerance for microprocessor controllers. Doctoral thesis, Durham University.

Winter, M.G (1989) The measurement of reinstatement backfill properties. Doctoral thesis, Durham University.

Masters

Bagshaw, Paul Christopher (1990) Sub-nyquist sampling techniques. Masters thesis, Durham University.

Barnes, R. (1971) The performance and behaviour of a non-linear resonant link for power systems. Masters thesis, Durham University.

Batacharia, Oscar (1977) A critical appraisal of plate girder design. Masters thesis, Durham University.

Bennett, Alan (1969) Hydrodynamic lubrication of soft solids. Masters thesis, Durham University.

Bey, Moussa Osman (1968) The behaviour of a thyristor assisted commutator. Masters thesis, Durham University.

Black, David Franklin (1977) Low frequency measurements on generator insulation. Masters thesis, Durham University.

Blamey, Jonathan M. (1990) Investigation into the strength, toughness and porosity of barium titanate PTC ceramics. Masters thesis, Durham University.

Elliott, D. J. (1970) Structural properties of flat sandwich panels. Masters thesis, Durham University.

Fifa, Ekaterini (1987) Spectral characterisation of variable reactance devices. Masters thesis, Durham University.

Fletton, Nigel Thomas (1988) Documentation for software maintenance and there documentation of existing systems. Masters thesis, Durham University.

Jarvis, Simon D.H. (1992) Automated lay-up of composite blades. Masters thesis, Durham University.

Kemp, J. R. (1970) A study of high strength concrete. Masters thesis, Durham University.

Khayat, Masin N. (1969) Pressure measurement by Piezo-electric transducers in reciprocating combustion engines. Masters thesis, Durham University.

Khayat, Mazin N. (1973) Effect of vibration on condensation heat transfer coefficient. Masters thesis, Durham University.

Kunsuik-Mengrai, Khemarat (1989) Survey and comparison of petroleum well electrologging tools. Masters thesis, Durham University.

Leaver, R. H. (1969) An investigation of the mechanics of tapered roller bearings. Masters thesis, Durham University.

Marshall, Stephen J. L. (1990) Microprocessor-based elastic feed systems for sewing applications. Masters thesis, Durham University.

Peck, James G. (1990) Finite element modelling of blowouts in compressed air tunnels. Masters thesis, Durham University.

Piercy, Richard Michael (1989) Binary Relation Database BIRD: Issues of Representation and Implementation. Masters thesis, Durham University.

Rhind, Valerie M. (1988) The validity and inter-relationship of subjective and objective measurements of stiffness in human joints. Masters thesis, Durham University.

Ryang, Nue Chille (1990) The treatment of time in distributed simulation. Masters thesis, Durham University.

Safi, Sabah K. (1990) Application of optimization algorithms in the design of a superconducting A.C. generator rotor. Masters thesis, Durham University.

Saglam, B (1976) The properties of fibre reinforced cement based sandwich beams. Masters thesis, Durham University.

Simon, Amaury (1991) Requirements for a software maintenance support environment. Masters thesis, Durham University.

Smith, I. (1978) Failure of polyhedral sandwich domes. Masters thesis, Durham University.

Tang, Wai Chung (1990) A comparative study of structured and un-structured remote data access in distributed computing systems. Masters thesis, Durham University.

Yung, P. (1981) The human metacarpophalangeal joint: quantification of stiffness and the effects of treatment. Masters thesis, Durham University.