Browse by Department (no authority control)

Adam, Andrew (2000) An assessment of the effects of pozzolanic activity on the behaviour of fly ash. Masters thesis, Durham University.

Alamin, Bubakar B. (1996) Tool life prediction and management for an integrated tool selection system. Doctoral thesis, Durham University.

Allen, A. T. (1964) An investigation into the social structure of the population of Gloucester C. B. Masters thesis, Durham University.

Aranzulla, Philip John (1995) The development and application of ambulatory monitor for measuring weight-bearing during fracture healing. Masters thesis, Durham University.

Aranzulla, Philip John (2000) Improved learning automata applied to routing in multi-service networks. Doctoral thesis, Durham University.

Armstrong, G. (1972) Coupling between torsional and bending modes of vibration in cantilever beams. Doctoral thesis, Durham University.

Ash, Hayley (1997) Development of surface replacement prostheses for the proximal interphalangeal and metacarpo phalangeal joints. Doctoral thesis, Durham University.

Ashfield, James Richard (2001) The computer simulation and prediction of rock fall. Doctoral thesis, Durham University.

Baghbani, Alireza (1999) Finite and infinite element method applied to water wave diffraction problems. Doctoral thesis, Durham University.

Baker, Robert Peter (1997) Cell design, management and continuous improvement. Masters thesis, Durham University.

Baxter, Jeremy (1994) Fuzzy logic control of automated guided vehicle. Doctoral thesis, Durham University.

Bayrakdar, Haluk (1995) Finite element modelling of transportation tunnels. Doctoral thesis, Durham University.

Bell, David Lloyd (1999) Three dimensional unsteady flow for an oscillating turbine blade. Doctoral thesis, Durham University.

Bell, Stephen Brooke (1988) The deformation of carbide cutting tools. Doctoral thesis, Durham University.

Bement, R.A.P. (1996) Ground compaction due to vibrodriving of piles. Doctoral thesis, Durham University.

Bennett, D. A. (1969) Investigation of the thermal stress in a thin plate. Masters thesis, Durham University.

Bennett, James (1981) Friction in journal bearings. Doctoral thesis, Durham University.

Bertolissi, Edy (1997) An application of an ethernet based protocol for communication and control in automated manufacturing. Doctoral thesis, Durham University.

Betteridge, Michael (2000) A methodology for aggregate assembly modelling and planning. Doctoral thesis, Durham University.

Bettess, P. (1971) Analysis of polyhedral domed structures composed of flat plates of sandwich material. Doctoral thesis, Durham University.

Birch, Philip Michael (1999) Liquid crystal devices in adaptive optics. Doctoral thesis, Durham University.

Blamey, J.M. (1993) Improved tribology and materials for a new generation of hip prostheses. Doctoral thesis, Durham University.

Boampong, Derrick Kwadwo (2003) The wear behaviour of ion implanted biomaterials. Doctoral thesis, Durham University.

Bradley, Hugh D. (1997) Aggregate process planning and manufacturing assessment for concurrent engineering. Doctoral thesis, Durham University.

Bradley, Martin James (1996) Adaptive equalisation for fading digital communication channels. Doctoral thesis, Durham University.

Brown, Neil Lovell (2002) Compact electrical generators for diesel driven generating sets. Doctoral thesis, Durham University.

Brown, T. E. (1976) Dynamic loading of journal bearings. Doctoral thesis, Durham University.

Buckingham, Andrew (2005) A software toolkit for radio frequency data terminals. Masters thesis, Durham University.

Bumby, J. R. (1974) Transient interaction and control scheduling in multimachine power systems. Doctoral thesis, Durham University.

Burgess, Ian C. (1997) Tribological and mechanical properties of compliant bearings for total joint replacements. Doctoral thesis, Durham University.

Carrington, Rachel Elizabeth (1995) Determination of aquifer properties from tidal influences on pore pressures. Masters thesis, Durham University.

Casalini, R (1999) Organic thin films: a comparison of their electrical and gas sensitivity. Doctoral thesis, Durham University.

Cattermole, Howard Charles (1995) Assessment of tibial fracture healing with dual energy X-ray absorptiometry: influence of metallic implants at the fracture site. Masters thesis, Durham University.

Chaudhary, Monish (2005) Low power radio networks. Masters thesis, Durham University.

Chen, Bo (1997) A higher order numerical method for transonic flows. Masters thesis, Durham University.

Chen, Hung-Ming (1997) A study of self-similar traffic generation for ATM networks. Doctoral thesis, Durham University.

Cheng, Ken Y-K (1977) Finite element analysis for the navier - stokes equations. Masters thesis, Durham University.

Cinzia, Vandelli Dott. Ing. (2002) Friction and wear of the Durham finger prosthesis. Masters thesis, Durham University.

Clewer, Bernard C. (1986) State estimation and bad data detection in electrical power system. Doctoral thesis, Durham University.

Cooper, George (1996) The design, simulation and fabrication of microengineered silicon gyroscopes. Doctoral thesis, Durham University.

Cudworth, Christopher J. (1974) Fluid lubrication of soft surface layers. Doctoral thesis, Durham University.

Custance, Lucie Jane (2005) Using discrete event simulation for scheduling and long range capacity planning of a high volume press shop. Masters thesis, Durham University.

Custance, Lucie Jane (2005) Using discrete event simulation for scheduling and long range capacity planning of a high volume press shop. Masters thesis, Durham University.

Cutbill, Sue (1998) A study of the turbulent flow of a high speed Coanda jet. Doctoral thesis, Durham University.

Darlington, John Allan (2002) Process assessment for the extended enterprise during early product development using novel computational techniques. Doctoral thesis, Durham University.

Darsely, R. R. (1969) Practical considerations in the reconciliation of the direct and indirect methods of measuring the air-earth current. Masters thesis, Durham University.

Ebrahimi-Looyeh, Mohammad-Reza (1999) Finite element simulation of heat flow in decomposing polymer composites. Doctoral thesis, Durham University.

Elfick, Alistair Philip David (1999) A Tribological assessment of the porous coated anatomic total hip replacement. Doctoral thesis, Durham University.

Emmanouilidis, Christos I. (1997) Soft computing for tool life prediction a manufacturing application of neural - fuzzy systems. Masters thesis, Durham University.

Evans, A. (1970) Some factors governing the formation of water droplets in the wake zone of flat plates in air streams. Masters thesis, Durham University.

Everson, G (1971) Investigation of a valveless pulse-combustor. Masters thesis, Durham University.

Fan, Zhong (1997) Some aspects of traffic control and performance evaluation of ATM networks. Doctoral thesis, Durham University.

Farid-Uddin, M. (1973) An investigation into distribution parameters of steam turbine blade and wheel vibration measurements. Masters thesis, Durham University.

Fernando, L.M (1986) The performance and application of cross flow fans for automotive engine cooling systems. Masters thesis, Durham University.

Forster, I. (1985) The hybrid electric vehicle. Doctoral thesis, Durham University.

Foster, Stephen John (1985) Some studies of laser doppler anemometry in wet steam. Doctoral thesis, Durham University.

Gilchrist, Andrew Robert (1985) The development and breakaway of a compressible air jet with streamline curvature and its application to the coanda flare. Doctoral thesis, Durham University.

Gkiouvetsis, Adamntois (2000) The effects of end wall profiling on secondary loss is a turbine nozzle row. Masters thesis, Durham University.

Glover, John Sigsworth (1995) The hardware implementation of an artificial neural network using stochastic pulse rate encoding principles. Doctoral thesis, Durham University.

Gore, Dilys (1981) Mechanical properties of articular cartilage: variation with depth. Doctoral thesis, Durham University.

Gore, Trevor A. (1980) The kinematics of normal and pathological hip joints. Doctoral thesis, Durham University.

Goulty, George A. (1969) The transmission of electricity in England and Wales: land use, and amenity aspects. Masters thesis, Durham University.

Grain, Rachel Victoria (2006) The search for a microtonal Flute. Masters thesis, Durham University.

Grant, David (1974) The surface resistivity of a cooled glass surface at the onset of water vapour condensation. Doctoral thesis, Durham University.

Hampson, L. G. (1972) The effects of friction reducing polymers on the operation of journal bearings. Doctoral thesis, Durham University.

Han, Chunlian (1999) The experimental investigation of a pipe robot. Masters thesis, Durham University.

Hancock, K. (1973) Some problems in gear metrology. Masters thesis, Durham University.

Hargreaves, R.A. (1973) The effects of lubricant starvation on the behaviour of rolling contact bearings. Doctoral thesis, Durham University.

Heatherington, S. (1974) An assessment of aerial surveyed string digital ground models. Masters thesis, Durham University.

Hermosilla, Belén Solano (2008) A microgripper for single cell manipulation. Doctoral thesis, Durham University.

Holgate, Michael John (1971) The stability of a fluid film on the surface of a cone. Doctoral thesis, Durham University.

Holland, M. David (2002) Foot function and normal coronal plane range-of-motion at the ankle-joint-complex. Masters thesis, Durham University.

Horner, D. (1984) The stability of liquid lubricated journal bearings. Doctoral thesis, Durham University.

Hossain, A T M. Shakhawat (2001) The engineering behaviour of the tropical clay soils of Dhaka, Bangladesh. Doctoral thesis, Durham University.

Howlett, John Henry (1972) An investigation into the structural behaviour of thin-walled aluminium alloy welded battened struts. Masters thesis, Durham University.

Hubbard, James (1996) Position sensing in restricted environments in automated manufacturing. Masters thesis, Durham University.

Hussain, Mazher C. (1974) The electrical conductivity of cellulosic derivatives in the presence of moisture. Masters thesis, Durham University.

Ingram, Grant Laidlaw (2003) Endwall profiling for the reduction of secondary flow in turbines. Doctoral thesis, Durham University.

Jayaraman, Punitha (1999) An investigation of secondary flow in a turbine blade with end wall profiling. Masters thesis, Durham University.

Jensen-Butler, Christopher N. (1970) An economic geography of consumer movement and expenditure patterns in county Durham. Doctoral thesis, Durham University.

Jing, Limei (2001) Rolling mill roll design. Masters thesis, Durham University.

Johnstone, Sherri (2002) Electromagnetic measurements of steel phase transformations. Doctoral thesis, Durham University.

Jones, Alan Robert (1984) The development of a microcomputer controlled hand assessment system for quantitative clinical measurement. Doctoral thesis, Durham University.

Jones, Iwan E. LI. (1997) Arsenic in the environment. Masters thesis, Durham University.

Joyce, Thomas J (1997) The development of an endoprosthesis for the metacarpophalangeal joint. Doctoral thesis, Durham University.

Keating, W.G. (1996) Tool selection and rationalisation. Masters thesis, Durham University.

Khawar Siddique Khokhar, (2006) Design and development of mobile channel simulators using digital signal processing techniques. Doctoral thesis, Durham University.

Kilitziraki, Maria (1996) Evaporated organic films of tetrathiafulvalene and related materials. Doctoral thesis, Durham University.

Laguda, Alima (2002) Aggregate assembly process planning for concurrent engineering. Doctoral thesis, Durham University.

Lee, Wonhee (1998) Computer simulation of a series and parallel hybrid electric vehicle. Masters thesis, Durham University.

Leonard, Damian Patrick Mapletoft (1991) An investigation of the performance of and the flow of solids and air in a vertical shaft impactor. Masters thesis, Durham University.

Lewis, Paul Robert (1996) Cutting data for automated turning tool selection in industry. Doctoral thesis, Durham University.

Li, Wei (2003) Positioning technology for stepwise underground robots. Doctoral thesis, Durham University.

Litchfield, M. R. (1974) The mechanical properties of a liquid-filled porous solid with reference to articular cartilage. Doctoral thesis, Durham University.

Litton, Eric (1967) Design investigations on some welded mild steel plate girders. Masters thesis, Durham University.

Lloyd, Jonathan (1999) The optimization of oil operation for a dry low NOx gas turbine combustor. Masters thesis, Durham University.

Lo, King Chuen (1996) Theory and realization of novel algorithms for random sampling in digital signal processing. Doctoral thesis, Durham University.

Löberg, Johan Ove (1970) Dry bands on polluted insulation. Masters thesis, Durham University.

Manos, G. C. (1975) Analysis of polyhedral domed sandwich structures. Doctoral thesis, Durham University.

Marco Palumbo, Dott (2004) Layer-by-layer assembly of organic films and their application to multichannel surface plasmon resonance sensing. Doctoral thesis, Durham University.

Marsden, Hollie Rebecca (1998) Development of a simplified test method for compliant layered bearings. Doctoral thesis, Durham University.

Maughan, Esther (1998) Characterisation of thin films of silicon rich oxides. Doctoral thesis, Durham University.

Mears, Andrew Paul (2004) The aerodynamic characteristics of an exposed racing car wheel. Doctoral thesis, Durham University.

Middleton, Kenneth George (1985) The failure of graphite arc-furnace electrodes. Doctoral thesis, Durham University.

Morrison, Jonathan Finlay (1982) A study of an axisymmetric wall jet with streamline curvature and its application to the coanda flare. Doctoral thesis, Durham University.

Mottram, J.T. (1984) Tee failure of carbon fibre reinforced plastic laminated plates under biaxial stresses. Doctoral thesis, Durham University.

Murray, I (1984) The tribological behaviour of cast iron in inert and reducing gas environments. Doctoral thesis, Durham University.

Nelson, Tracy Jane (2003) Identifying sediment sources in the tees catchment. Doctoral thesis, Durham University.

Ning, Wei (1998) Computation of unsteady flow in turbomachinery. Doctoral thesis, Durham University.

Nunn, Douglas John Edgar (1997) Analysis and resynthesis of polyphonic music. Doctoral thesis, Durham University.

Nyong, Obong Dennis Obot (1999) Performance modelling and the representation of large scale distributed system functions. Doctoral thesis, Durham University.

Ong, Keng H. (1979) Silicate stabilization of soft granular materials for sandwich plate cores. Masters thesis, Durham University.

Ozveren, Guneyt Suheyl (1981) Pre-breakdown electrical conductivity of nearly saturated mercury vapour at medium pressures. Doctoral thesis, Durham University.

Pearson, C. (1996) Langmuir-blodgett films of organic charge-transfer complexes. Doctoral thesis, Durham University.

Pearson, Jonathon C. (1983) The reliability of small digital controllers. Doctoral thesis, Durham University.

Phillips, Desmond Keith (1996) Algorithms and architectures for the multirate additive synthesis of musical tones. Doctoral thesis, Durham University.

Quinn, Kevin (1977) Some early examples of plant development and process control in the chemical industry. Masters thesis, Durham University.

Ramshaw, Christine Lesley (2002) Computation of ground waves from pile driving and their effects on structures. Doctoral thesis, Durham University.

Rawaf, Abdallah Saad (1985) Strains in concrete beams subjected to climatic conditions similar to those of central Saudi Arabia. Doctoral thesis, Durham University.

Reed, Jonathan Peter (1995) Inverse solution techniques for determining aquifer parameters from pump test data. Masters thesis, Durham University.

Reeve, Jonathan Mark (1998) Learning algorithms for the control of routing in integrated service communication networks. Doctoral thesis, Durham University.

Regan, Philippa (2002) Improving usability in pan gateways by means of a novel Bluetooth pairing method. Masters thesis, Durham University.

Revere, Kelvin Mark (2000) A distributed decision support system for turning and milling operations using the internet. Doctoral thesis, Durham University.

Roberts, Barbara Janet (1982) The lubrication of natural and artificial hip joints. Doctoral thesis, Durham University.

Robinson, Stephen David (1996) The design and intelligent control of an autonomous mobile robot. Doctoral thesis, Durham University.

Roding, Wernher Erich (2001) Vernier hybrid wind turbine generators. Masters thesis, Durham University.

Rose, Albert (1975) Externally pressurised stern - gear. Masters thesis, Durham University.

Routledge, Edward G. (1971) Linear control of machine tools using fluidic devices. Masters thesis, Durham University.

Sato, Kenji (1999) Blade row interaction in radial turbomachines. Doctoral thesis, Durham University.

Senior, Peter (1991) The aerodynamics of curved jets and breakaway in Coanda flares. Doctoral thesis, Durham University.

Shafie-Pour, A. R. (1989) Real-time power system security assessment. Doctoral thesis, Durham University.

Shendy El Barbary, Mohamed E. (1981) The properties of concrete sandwich beams with polystyrene concrete cores. Doctoral thesis, Durham University.

Shohada, Mohsen-Fadaee (1987) Polyester resin concrete: mix development and the structural behaviour of some components. Doctoral thesis, Durham University.

Shum, Ellen (1998) Optimisation techniques for low bit rate speech coding. Masters thesis, Durham University.

Sitoh, Paul Jek (1996) The development of a methodology for the evaluation of installed CAPM system’s effectiveness and efficiency. Masters thesis, Durham University.

Snaith, Jane E. (1976) Load / deformation / time behaviour of articular cartilage. Doctoral thesis, Durham University.

Southgate, Jonathan (2004) Wax removal using pipeline pigs. Doctoral thesis, Durham University.

Spanier, Jonathan Robert (1999) Algorithms and VLSI architectures for parametric additive synthesis. Doctoral thesis, Durham University.

Speed, Catherine A. (1998) Grip strength, forearm muscle fatigue and the response to handgrip exercise in rheumatoid arthritis. Doctoral thesis, Durham University.

Staskiewicz, Klaus Peter (1970) The behaviour of drops of water moving through a superheated steam atmosphere. Doctoral thesis, Durham University.

Stutchbury, Neil William (1999) Design characteristics of a pipe crawling robot. Doctoral thesis, Durham University.

Sugimoto, Rie (2003) Special wave finite and infinite elements for the solution of the Helmholtz equation. Doctoral thesis, Durham University.

Summad, Emad (2001) A Monte-Carlo approach to tool selection for sheet metal punching and nibbling. Doctoral thesis, Durham University.

Taylor, Alistair James Eden (1990) Techniques for power system simulation using multiple processors. Doctoral thesis, Durham University.

Ummat, P. K. (1966) Studies on the co-ordination chemistry of Amides, Imides and related compounds. Masters thesis, Durham University.

Vasanthakumar, Parthasarathy (2003) Three dimensional frequency-domain solution method for unsteady turbomachinery flows. Doctoral thesis, Durham University.

Velásquez, Luis Alexis (2000) Web-based strategies in the manufacturing industry. Doctoral thesis, Durham University.

Velasquez, M.E. (2000) Internet-based solutions to support distributed manufacturing. Doctoral thesis, Durham University.

Ward, H. C. (1968) An investigation into the accuracy of industrial measurements as practised by the engineering industries in the Teesside area. Masters thesis, Durham University.

Watson, P A (1968) A study of the noise temperature and bandwidth of microwave parametric amplifiers. Doctoral thesis, Durham University.

Watson, Simon (1996) Utilising a fieldbus protocol in a water quality monitoring system. Masters thesis, Durham University.

Weatherall, J. O. (1970) An investigation into the proportional discharge of air from side outlets on a small-scale terminal ventilation duct. Masters thesis, Durham University.

Wilde, Jason N. (1998) Optical sensing of organic vapours using langmuir-blodgett films. Doctoral thesis, Durham University.

Wilkinson, Michael Richard (2003) Parameters affecting inductive displacement sensors. Masters thesis, Durham University.

Wright, Barrie David (1983) Some aspects of the time dependent strength behaviour of a range of tungsten carbide - cobalt materials. Doctoral thesis, Durham University.

Yan, Jin (1999) The effect of end wall profiling on secondary flow in nozzle guide vanes. Doctoral thesis, Durham University.

Yang, Jinoh (1998) Optimum reinforcement design of a passenger vehicle door panel to minimise vibrational deformation. Masters thesis, Durham University.

Yeates, H. (1981) Some experiments in man-machine interaction relevant to computer assisted learning. Masters thesis, Durham University.

York, Herbert C. (1971) The economics of the use of numerically controlled machine tools and program development. Masters thesis, Durham University.

Young, Jung Gun (2001) Electroluminescent devices based on polymeric thin films. Doctoral thesis, Durham University.

Young, Michael (1999) Development and experimental analysis of a micromachined Resonant Gyrocope. Doctoral thesis, Durham University.